# What Is Repair Availability? | Designing Products That Can Be Restored and Used After Failure

- Published: 2026-11-15
- Updated: 2026-11-15

## Summary

A chip resistor or SMD fuse is not necessarily unrepairable simply because it is surface-mounted. Full-board replacement can result from integration, diagnostic access, safety revalidation, available spare parts, or a manufacturer’s service policy. Repair Availability is the capacity to diagnose and safely restore a product at reasonable time and cost, replace time-limited modules, and—where its architecture permits—upgrade to newer technology while keeping usable equipment in service.

## Key Points

- Array
- Life-cycle design of maintainability and maintenance management
- Managing component obsolescence and end-of-production risks
- Methods for assessing repair and upgrade potential
- Primary manufacturer information on resettable PPTC protection behavior
- The 2011 product configuration and its then-projected service period

## References

### External_primary_source

- IEC 60300-3-10:2025, Maintainability and Maintenance
  - URL: https://webstore.iec.ch/en/publication/65334
- IEC 62402:2019, Obsolescence Management
  - URL: https://webstore.iec.ch/en/publication/59531
- EN 45554:2020, Repair, Reuse and Upgrade of Energy-Related Products
  - URL: https://www.nen.nl/en/nen-en-45554-2020-en-270440
- Littelfuse PolySwitch Resettable PPTC Devices, Technical Information
  - URL: https://www.littelfuse.com/products/fuses-overcurrent-protection/polyswitch-resettable-pptc-devices
### External_secondary_reference

- Nikkei, 14 June 2011: Solar power storage system by Kei Communication Technology
  - URL: https://www.nikkei.com/article/DGXNZO30407020U1A610C1TJE000/

## Source Article

- URL: https://www.ieee802.co.jp/articles/article-117-offgrid-en.php
- Published: 2026-11-15
- Updated: 2026-11-15

## Copyright

© Kei Communication Technology Inc.

This file is a summary of the source article. For the latest information, refer to the source URL.